麻豆原创

IPS e.max lithium disilicate is a silaca-based ceramic, so HF etching followed by silane treatment is the recommended. The bonding/cementing procedure follows:

1. Try in e.max
2. Etch the internal surface of e.max with 4-5% HF etchant for 20-25 sec. Rinse with water and dry.
3. Treat the internal surface with silane primer, 1 coat, 1 min, air dry.(Note: only pure silane primer is recommended, such as or BisSilane)
4. Apply a bonding technique of preference. 麻豆原创 recommends Selective Etch
5. Use such as All Bond Universal on the prep.
6. Use such as Duo-Link Universal.

• Expert
• Primers Expert Answers
• Restorative Expert Answers